Komodo Kamado 23" OTB Gen 2.6
Komodo Kamado 23" OTB Gen 2.6
Komodo Kamados may be the most striking cookers in the world. The Gen 2.6 with a 23" wide top grate, stands 50.5" high, 30" wide at the base, and is 36" deep. It weighs a whopping 534 pounds. They arrive fully assembled, but you might need help getting it out of the crate and into position.
The first thing you notice is how well built this zaftig sweetheart is. From the serious 304 stainless steel spring assisted hinge assembly for the easy-open lid, to the fingertip release latch, to the beautifully inlaid tiles. The casters are large enough to roll this beast across bumpy brick pavers. The cooking grates and charcoal basket are thick 3/8" 304 stainless rods, and the upper grate is hinged so you can add more charcoal without removing the food.
The air inflow damper at the bottom is a rotating dial, and the entire assembly slides out easily if you want to allow max airflow. The upper damper looks like a helmet, and you turn it on a screw to lift it and allow hot air and smoke out. This is fairly precise and it keeps rain out, but it is pretty easy to lose track of how many spins you've given it. Airflow can also be managed with a digital controller like Rock's Stoker or a BBQ Guru and it comes with a port designed for them. There is a hole drilled in the dome for a dial thermometer, and a port on the side at grate level for digital probe cables. Although the Tel-Tru bi-metal dial thermometer that comes with it is pretty close to accurate at low temps, it is way off at high temps. This is one of the few cookers we've used where the dome thermometer is anywhere close to accurate. As usual we recommend you get a good digital grill thermometer.
One of the most unique features of KK's Gen 2.6 is the ability to be set up for 2-zone cooking, an essential technique that allows cooking on direct hot heat and indirect moderate heat simultaneously. This enables cooks to slide foods back and forth from cool to hot zones for crisping skin and reverse sear steaks. Most Kamado aficionados concede the best way to create different heat zones in round cookers is by moving foods closer to or further from the coal. This is typically accomplished using a variety of accessories that can be costly and awkward to use. Click here to read more about Kamado and Ceramic Grills and Smokers.
You can set up for indirect heat by inserting a deflector plate, but if you want to sear a steak or sizzle on a sauce over direct heat, you have to remove the food and the hot deflector.
KKs have mounts for rotisseries, can be fitted with side tables, and there is a pizza stone available, too. This 23" model has three racks, an upper, middle, and lower, and the lower can be positioned right on top of the coals for max heat searing. It can even be fitted with a gas igniter.
The 2" thick sandwich of two refractory materials is like concrete. One might be concerned that the tiles will need extra maintenance. Apparently they are not held in with a normal grout. The manufacturer claims it is elastomeric so it expands and contracts with heat and it is said to be UV resistant so it does not require any maintenance. If you knock a tile loose, the manufacturer ships the unit with a repair kit.
You can start the coals by simply dumping them in the coal basket and lighting them with a Weber parafin block from below or some bunched up newspaper. Many owners use small torches to fire up in a hurry. Or you can use a chimney, which makes it easy to measure the amount of coal.
Managing temp is relatively easy once you get the hang of it. The manufacturer recommends that you always fill the charcoal basket, even if you are cooking at a low temp, and control the temp with the air vents. It will take a little practice to learn what settings get you where you want to go, especially since the first hour is spent getting those thick walls loaded with heat. When you give 'er all she's got, Scotty, she can easily surpass 700°F.
Once you hit a target temp, man, she is rock solid with all that mass holding that heat and radiating it back slowly. Surprisingly, it is very responsive to the slightest increase in oxygen supply, a tweak to the vent openings, top or bottom, and within minutes the temp starts to climb. It is a bit less responsive to shutting down oxygen supply because of all that thermal mass, but it does choke down nicely.
Minor issues: The handles on the grates are almost flush against the interior making it awkward to grip them unless you turn your hands so your thumbs face you; the lid handle can get hot when cooking with the lid open because it hovers right above the cooking surface; and the latch has a nasty habit of smashing your fingers if you close the lid too quickly. All these are niggling things that you can easily work around once you get used to them.
This is a top choice for low and slow smoke roasting and for large cuts of meat, but it is not our first choice for recipes that call for moving from indirect to direct because removing the deflector plate when food is on is a bit of a hassle.
Lifetime warranty on everything included. The Komodo Kamado website has a lively message board with tips on technique.
All sales are direct from owner/designer, Dennis Linkletter, (grandson of TV legend Art Linkletter), in Bali, Indonesia. Check out our Manufacturers Profile of Komodo Kamado for more info.
$4,260 Manufacturer's suggested retail price (MSRP), actual price may vary.
Egg or Kamado Style
Combination Grill & Smoker
415 square inches ( about 20 burgers )
Manufacturer claims that all or practically all of this device is made in the USA
Cooked On It
We have hands-on experience testing this product. We have also gathered info from the manufacturer, owners and other reliable sources.
| Weights, Measures, Conversions | Tips & Techniques | Recipes | Equipment Reviews | BBQ Culture & History |
| My Ingredients | BBQ Joints | About Us | Blog | Links | Newsletter | BBQ Tunes |
| Privacy Promise, Code of Ethics, Other Legal Terms | Advertising & Sponsorship Opportunities |