If we have helped you become a better cook, please become a Pitmaster Club member and help us become a better website. Benefits for members include:
(1) Seminars with famous Pitmaster Professors
(2) Access to The Pit forum and scores of new friends
(3) An expanded Temperature Guide Magnet that selles for $9.95
(4) Gold Medal Giveaways of free grills and smokers
(5) Support for Operation BBQ Relief
Backwoods makes a range of more than a dozen sizes of impressive, front-loaded charcoal or wood-fueled cabinet smokers in Louisiana. They can even custom build if one of their standards won't work for your needs.
The small units are superb for home cooks, the medium size units are very popular on the competition scene and are favored by many top teams, and the large ones are used by caterers, whole hog cookers, and in restaurants. Mike McGowan and his team have been building these fine smokers since 1987.
There is a lower door for the fuel, and above the charcoal below the bottom shelf in the food chamber there is a large capacity stainless steel water pan that puts significant humidity into the atmosphere and keeps food moist. This moisture is both good and bad in that it takes longer to build a good hard bark.
They are built with three walls: The space between the outside wall and center wall is filled with insulation so the heat stays within the unit. They perform superbly even in freezing weather, We have tested that thoroughly in rough, Chicago winter weather with the G2 Party model they shipped us to try. There is an air gap between the center wall and the inner wall through which smoke and heat travel from the firebox in the lower compartment past the water pan up to the top of the cooking chamber. Smoke and heat enter the cooking chamber at the top of the side walls and heat also radiates through the inner walls. The chimney opening is at the bottom of the back wall so smoke and heat work their way down past the food from the top, exit the cooking chamber at the bottom, and then go back up the chimney. Because the duct from the firebox opens at the top, the top shelf runs a bit hotter than lower shelves.
Materials, welds, and bends are high quality. There are stainless steel protectors on the top corners, the door latches and gaskets close tight with a satisfying kerthunk. Shelves are heavy 304 stainless steel. Not surprising, these babies are heavy.
Backwoods Smokers have many many admirers, Meathead is among them.
Backwoods Smoker Competitor
The standard Backwoods Competitor comes with stainless doors and latches, the new low profile smoke stack, non-removable water pan and splatter guard. Overall dimensions are 55" tall including the stack, 24"wide, 32" deep. Cooking chamber is 29" tall, 20" wide, and 20" deep. Holds 8 racks 19.5" x 19.5" spaced 3 inches apart and an additional 7 racks can be added. The Competitor can handle 6 small turkeys, 32 slabs baby back ribs, 24 slabs of St. Louis cut ribs, 8 whole briskets, 16 to 20 Boston butts. Options include a heat diverter plate above the coals, casters, stand, tie down handles, cover, thermostat controller, additional shelf sliders, auto gas, auto water filler and drain.
$3,390 Manufacturer's suggested retail price (MSRP), actual price may vary.
Where To Buy (Buying from these suppliers supports this website):
AN URGENT MESSAGE FROM MEATHEAD: If you like AmazingRibs.com, please save this link and use it every time you go to Amazon. Amazon and many other websites pay us a small referral fee when you click our links and purchase from them. It works on everything from grills to diapers, Amazon never tells us what you bought, and it has zero impact on the price you pay, but has a major impact on our ability to improve this site! And remember, we only recommend products we love.
GrillGrates(TM) amplify heat, prevent flareups, make flipping foods easier, keep small foods from committing suicide, kill hotspots, are easier to clean, flip over to make a fine griddle, and can be easily removed and moved from one grill to another. You can even throw wood chips, pellets, or sawdust between the rails and deliver a quick burst of smoke to whatever is above. Every gas grill needs them.
The PK Grill has become our favorite charcoal grill. It proves some ideas never die.
Designed in 1952, the rectangular shape is easy to set up in 2 or 3 heat zones, it can easily be used as a smoker, the cast aluminum body is indestructible, airflow is easy to manage, and there is plenty of room under the hood.
Made of rugged 1/8" thick aluminum, 20" long, with four serious rivets, mine show zero signs of weakness after years of abuse. I use it on meats, hot charcoal, burning logs, and with the mechanical advantage that the scissor design creates, I can easily pick up a whole packer brisket. Click here to read more. - Meathead
Mo's Smoking Pouch is essential for gas grills. It is an envelope of mesh 304 stainless steel that holds wood chips or pellets. The airspaces in the mesh are small enough that they limit the amount of oxygen that gets in so the wood smolders. Put it on top of the cooking grate, on the burners, on the coals. It holds enough wood for about 15 minutes for short cooks, so you need to refill it or buy a second pouch for long cooks like pork shoulder and brisket. Mine has survived more than 50 cooks. I like it better than the smoker tubes. Click for more info. - Meathead
These are the same knives used at famous steakhouses like Peter Luger, Smith & Wollensky, and Morton's. Machine washable, high-carbon stainless steel, hardwood handle. And the manufacturer has printed the AmazingRibs.com name on it! Click for more info. - Meathead